DIY Gold Leaf Coasters
You will need:
1 part resin
1 part hardener
Gold leaf flakes
First, put on some protective gloves.
Pour 1 part of resin and 1 part of hardener into a plastic cup and mix it well.
Pour the casting epoxy into a silicon mold.
Add a pinch of gold leaf flakes into each mold.
Mix and break up the gold leaf.
Add more gold leaf and mix it around.
Let it harden for 24 hours.
Once it has hardened, remove it from the mold and apply some polish to a towel, then wipe it onto the coaster.
Share This Story On Facebook!